NETWORK CABLE

Product Catalog

Figures are taken from the HongFeng catalog. Conductor can be CCA or bare copper, and jacket color can be specified. Confirm the drawing before an order.

HongFeng CAT5E cable construction: PVC jacket, PE insulation, rip cord, and copper conductors
CAT5E indoor cable, schematic

CAT5E Indoor / Outdoor

CAT5E UTP · FTP · SFTP

For 10Base-T, 100Base-TX, and 155Mbps ATM. Indoor jacket is PVC or LSZH in any color. Outdoor jacket is single PE or double PVC+PE, in black.

  • Transmission standard YD/T 1019-2001
  • Characteristic impedance 100±15Ω
  • Mutual capacitance 47pf/m
  • DC resistance ≤9.38Ω/100m
  • Capacitance unbalance ≤330pf/km
  • Resistance unbalance (20°C) ≤2%
  • Insulation resistance ≥5000MΩ·km
  • Flame retardance to IEC 60332-1
  • Minimum bending radius 4× cable diameter
  • Maximum tension 110N, load voltage ≤DC 300V
Indoor construction. Outdoor UTP uses the same 0.51mm conductor, with jacket diameters of about 4.5mm and 5.5mm.
Model Specification Conductor Insulation OD Jacket OD Jacket
HFCABLE-3UINDOOR (UTP)2×2×0.51 0.51±0.01mm 0.90mm 4.1±0.2mm PVC / LSZH
HFCABLE-5EUINDOOR (UTP)4×2×0.51 0.51±0.01mm 0.90mm 5.2±0.2mm PVC / LSZH
HFCABLE-5EFINDOOR (FTP)4×2×0.51 0.51±0.01mm 0.92±0.02mm 5.8±0.2mm PVC / LSZH
HFCABLE-5ESFINDOOR (SFTP)4×2×0.51 0.51±0.01mm 0.92±0.02mm 6.4±0.2mm PVC / LSZH

CAT6 Indoor / Outdoor

CAT6 UTP · FTP · SFTP

Four pairs with a cross separator. Shielded versions add CCA or bare-copper braid over aluminum foil. Impedance, resistance, and flame ratings in the catalog match the CAT5E page.

Model Specification Conductor Insulation OD Jacket OD Jacket
HFCABLE-6UINDOOR (UTP)4×2×0.57 0.57±0.01mm 1.02±0.02mm 6.0±0.2mm PVC / LSZH
HFCABLE-6UOUTDOOR (UTP)4×2×0.57 0.57±0.01mm 1.02±0.02mm 6.0±0.2mm PE or PVC+PE, black

CAT6A Indoor

U/UTP · U/FTP · F/FTP · S/FTP

The unshielded construction is U/UTP. Shielded constructions combine aluminum foil and braid, with a bare or tinned copper drain wire.

Model Specification Conductor Insulation OD Jacket OD Jacket
HFCABLE-6AUINDOOR (U/UTP)4×2×0.57 0.57±0.01mm 1.02±0.02mm 6.0±0.2mm CM / CMR / PVC / LSZH

Messenger, 2DC & Patch Cord

MESSENGER · 2DC · PATCH CORD

Self-supporting messenger cable is for outdoor aerial runs. A galvanized steel wire carries the cable, and the UV jacket is CMX. CAT5E and CAT6 are both available. The network-plus-2DC composite carries data and power in one cable. Model HFCABLE-5EUOUTDOOR+2DC.

Patch cords are factory-terminated with RJ45 and tested under a constant load. Lengths: 0.5m, 1m, 2m, 3m, 5m, 10m, and others on request.

Messenger jacket is about 10.5±0.2mm, with 1.2mm steel wire. Patch-cord jacket is CM / CMR / PVC / LSZH.
Patch cord AWG Conductor Jacket OD
HFCABLE-23AWG237/0.226.2±0.2mm
HFCABLE-24AWG247/0.206.2±0.2mm
HFCABLE-26AWG267/0.165.5±0.2mm
HFCABLE-28AWG287/0.125.5±0.2mm

Speaker & Alarm Cable

SPEAKER · ALARM

Speaker cable connects amplifiers, loudspeakers, and broadcast systems. Stranded CCA or bare copper, transparent polyethylene insulation, rated 300V. Long-term working temperature should not exceed 70°C. Common sizes are 2×0.55mm² and 2×1.0mm².

Alarm cable is a flexible signal cable for security and other low-voltage, low-current circuits. Bare copper or copper-covered aluminum, PVC insulation, white PVC or LSF sheath, shielded or unshielded. Rated 60V and 70°C.

Cores Conductor Approx. OD Core colors
40.22mm3.4mmBlack, red, blue, yellow
60.22mm4.2mmPlus white, green
80.22mm4.5mmPlus orange, brown
120.22mm5.4mmPlus grey, light blue, pink, violet

RG59 / RG6 Coaxial

75Ω COAXIAL

For video, communication, and signal control, including surveillance and cable television. CCS or bare copper conductor, solid or foam polyethylene insulation, aluminum foil with CCA or aluminum braid, and a PVC jacket. Long-term working temperature should not exceed 70°C. Packed in 100m or 200m rolls.

Model Specification Braid OD
HFCABLE-RG59 1×0.81mm 32–144 6.1±0.2mm
HFCABLE-RG592DC 1×0.81mm + 2DC 32–144 6.1 + 5.1mm

ADSS Fiber Cable

ALL-DIELECTRIC SELF-SUPPORTING

Loose-tube stranded construction. 250μm fibers sit in a high-modulus plastic tube filled with water-blocking compound. Tubes are stranded around a non-metallic FRP strength member. A polyethylene inner sheath, aramid yarn, and a PE or anti-tracking AT outer sheath complete the cable.

Attenuation and bandwidth as printed in the catalog.
Fiber 850nm 1300nm 1310nm 1550nm Bandwidth
G.652 — — ≤0.36 dB/km ≤0.22 dB/km —
G.655 — — ≤0.40 dB/km ≤0.23 dB/km —
50/125μm ≤3.0 dB/km ≤1.0 dB/km — — ≥500 / ≥1000 MHz·km
62.5/125μm ≤3.0 dB/km ≤1.0 dB/km — — ≥200 / ≥600 MHz·km

Accessories & OEM / ODM

ACCESSORIES · PACKING

  • RJ11 connector 6P4C
  • RJ45 connector 8P8C
  • RJ45 FTP connector 8P8C
  • RJ45 CAT7 connector
  • RJ45 boot cover
  • Keystone
  • Network face plate and frame
  • Network cabinet
  • RJ45 crimping tool and cable tester
  • Fiber patch cord, pigtail, and adapter
  • FTTH drop cable

For cables of 4 pairs or fewer: 100m paper coils; 305m easy-pull boxes or plastic coils; 500m and 1000m wooden coils, on recycled or fumigated wooden trays. From 4 pairs to 100 pairs, usual lengths are 305m, 500m, and 1000m, packed in wooden boxes or to the customer’s requirement.

For a construction drawing or a quotation, leave the project details on the contact page.